Hikvision Digital Technology DS-2AF5268N-A3 Manual de usuario

Analog Speed Dome User Manual UD.6L0201D1445A01

User Manual of Analog Speed Dome © Hikvision 9 random scan, frame scan, panorama scan, day/night mode or none.

User Manual of Analog Speed Dome © Hikvision 10 Chapter 2 Getting Started 2.1 Power-up Action After the power is connected, the speed dome will perfo

User Manual of Analog Speed Dome © Hikvision 11 2.2 Basic Operations You can operate the speed dome using a control device. The control d

User Manual of Analog Speed Dome © Hikvision 12 Note: For Manchester code control protocol, the system-defined presets with special functions are show

User Manual of Analog Speed Dome © Hikvision 13 Chapter 3 Menu Operation The OSD menu tree is shown in the following figure. Note: The menu varies dep

User Manual of Analog Speed Dome © Hikvision 14 4. For PELCO-P/D and other private PTZ protocols, call preset 95 from the preset list in

User Manual of Analog Speed Dome © Hikvision 15 similar to the system information shown after the power-up action. Please refer to Section 2.1 for mor

User Manual of Analog Speed Dome © Hikvision 16 If the SOFT ADDR is set to OFF, the hard address set by the DIP switch is the valid address of the spe

User Manual of Analog Speed Dome © Hikvision 17 2. Click the left/right/up/down direction buttons to adjust the view angle. 3. Click IRIS+ button to

User Manual of Analog Speed Dome © Hikvision 18  RS-485 checksum setting You can set the 485CHECK SET as ON or AUTO for improving the controlling e

User Manual of Analog Speed Dome © Hikvision 1 Thank you for purchasing our product. If there is any question or request, please do not hesitate to co

User Manual of Analog Speed Dome © Hikvision 19 Task 1: Configure the focus settings.  Setting the focus mode Steps: (1) Move the cursor to FOCUS us

User Manual of Analog Speed Dome © Hikvision 20 (1) IR cut filter. It can be set as AUTO, DAY or NIGHT. AUTO: The speed dome is capable of automatica

User Manual of Analog Speed Dome © Hikvision 21  Set the Gain  Gain value. The value of gain indicates the amplification degree of the original

User Manual of Analog Speed Dome © Hikvision 22 HAUTO: Selecting this mode, the viewed image retains color balance automatically according

User Manual of Analog Speed Dome © Hikvision 23 1. Move the cursor to enter the privacy mask configuration submenu: MAIN MENUS > DOME SETTINGS >

User Manual of Analog Speed Dome © Hikvision 24 4. Enable or disable the privacy mask function. Move the cursor to BLANK STATUS. Click IRIS+ button t

User Manual of Analog Speed Dome © Hikvision 25 Figure 3-11 Get the Codes of a Character (2) On the SET TITLE menu, call the presets standing

User Manual of Analog Speed Dome © Hikvision 26 choose each display mode as ON or OFF, and define each display time as 2 seconds, 5 seconds or 10 seco

User Manual of Analog Speed Dome © Hikvision 27 automatically reduce or increase the panning and tilting speed according to the zooming amount. This

User Manual of Analog Speed Dome © Hikvision 28 the new settings. 4. Follow the prompts to configure the right, up and down limit stops on the menu

User Manual of Analog Speed Dome © Hikvision 2 Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comp

User Manual of Analog Speed Dome © Hikvision 29 Note: The preset position settings will be restricted by the limit stops if they are defined. 4. Ca

User Manual of Analog Speed Dome © Hikvision 30 NUM PRESET DWELL SPEED 1 0 6 30 2 0

User Manual of Analog Speed Dome © Hikvision 31 Steps: 1. Move the cursor to enter the PATTERNS submenu: MAIN MENU > DOME SETTINGS > PATTERNS P

User Manual of Analog Speed Dome © Hikvision 32 remaining memory shown under PATTERNS menu as REMAINING.  The pan/tilt movements and the lens operat

User Manual of Analog Speed Dome © Hikvision 33 Steps: (1) Move the cursor to TASK STATE and click IRIS+ to enter edit mode. (2) Click the up/down d

User Manual of Analog Speed Dome © Hikvision 34 A zone is a panning and tilting area defined by the left/right and up/down limit stops.

User Manual of Analog Speed Dome © Hikvision 35 You can clear all user-defined PTZ control settings, including presets, patrols, patterns, zon

User Manual of Analog Speed Dome © Hikvision 36 Item Description POWER UP The occurrence times of abnormal reboot PAN LOST The occurrence times of pan

User Manual of Analog Speed Dome © Hikvision 37 3.6.1 Configuring Alarm Input and Linked Actions Purpose: This section explains how to configu

User Manual of Analog Speed Dome © Hikvision 38 If multiple alarms with different priorities are triggered at the same time, the dome on

User Manual of Analog Speed Dome © Hikvision 3 Safety Instruction These instructions are intended to ensure that the user can use the prod

User Manual of Analog Speed Dome © Hikvision 39 AUX AUX1 CLOSE DWELL TIME 2 AUX2

User Manual of Analog Speed Dome © Hikvision 40 2. Click IRIS+ to enter edit mode. 3. Click the left/right buttons to select the digit of t

User Manual of Analog Speed Dome © Hikvision 41 AE mode Auto Exposure compensation 7 White balance Auto Auto-flip On Proportional pan On Park time 5 s

User Manual of Analog Speed Dome © Hikvision 42 Appendix Appendix 1 Lightning & Surge Protection This product adopts TVS plate lightning pro

User Manual of Analog Speed Dome © Hikvision 43 Appendix 2 RS485 Bus Connection  General Property of RS485 Bus According to RS485 industry bus

User Manual of Analog Speed Dome © Hikvision 44 faraway. At this time, the dome will be uncontrollable, or self-running, etc. 6#主控设备1#32#15# Figure A-

User Manual of Analog Speed Dome © Hikvision 45 Problem Possible Reasons To Solve the Problem dome can be controlled but not smoothly. tightly. 2. RS4

User Manual of Analog Speed Dome © Hikvision 46 Appendix 3 24VAC Wire Gauge & Transmission Distance The following table describes the recommended

User Manual of Analog Speed Dome © Hikvision 47 Appendix 4 Table of Wire Gauge Standards Bare Wire Gauge(mm) American Wire Gauge AWG British Wire Gaug

User Manual of Analog Speed Dome © Hikvision 4 Cautions:  Make sure the power supply voltage is correct before using the product.  Do not drop the

User Manual of Analog Speed Dome © Hikvision 5 Table of Contents Chapter 1 Overview ...

User Manual of Analog Speed Dome © Hikvision 6 Appendix 3 24VAC Wire Gauge & Transmission Distance ...

User Manual of Analog Speed Dome © Hikvision 7 Chapter 1 Overview 1.1 Description Integrated with the built-in pan/tilt unit, the speed dome

User Manual of Analog Speed Dome © Hikvision 8 Label Display The on-screen label of the preset title, time, zoom and other operations can