Hikvision Digital Technology DS-9016HWI-ST Manual de usuario

Digital Video Recorder User Manual UD.6L0202D1336A01

User Manual of Digital Video Recorder 9 TABLE OF CONTENTS Product Key Features ...

User Manual of Digital Video Recorder 99 Figure 6. 11 Interface of Playback by Event Figure 6. 12 Toolbar of Playback by Event Table 6. 2 Detailed

User Manual of Digital Video Recorder 100 6.1.4 Playing Back by Tag Purpose: Default tags and customized tags can be added to mark the record files,

User Manual of Digital Video Recorder 101 Figure 6. 14 Tag Management Interface Steps: 1. Enter Playback interface. Menu>Playback 2. Click

User Manual of Digital Video Recorder 102 Pre-play and post-play time can be set according to actual needs. Pre-play time and post-play time is adde

User Manual of Digital Video Recorder 103 mode

User Manual of Digital Video Recorder 104 6.1.5 Smart Playback Purpose: The smart playback function provides an easy way to get through the l

User Manual of Digital Video Recorder 105 Table 6. 4 Detailed Explanation of Smart Playback Button Operation Button Operation Button Operation Smar

User Manual of Digital Video Recorder 106 6.1.6 Playing Back by Searching System Log Purpose: You can also play back record file(s) after searching

User Manual of Digital Video Recorder 107 Figure 6. 21 Result of System Log Search 6. Select a log with record file and click button to enter Pl

User Manual of Digital Video Recorder 108 The files stored in the extrenal device are listed in the right-side list. You can click the Refresh button

User Manual of Digital Video Recorder 10 4.2.6 Calling Patterns ...

User Manual of Digital Video Recorder 109 Figure 6. 24 Frame Extracting Record Playback Interface 2. Select the record type (Normal, Event and Tag

User Manual of Digital Video Recorder 110 6.2 Auxiliary Functions of Playback 6.2.1 Playing Back Frame by Frame Purpose: Play video files frame by

User Manual of Digital Video Recorder 111 Figure 6. 27 Interface of Smart Playback 2. Click the icon on the toolbar to enter Smart Search mode.

User Manual of Digital Video Recorder 112 click the button to set the full screen as the detection area. 4. Click the icon to start the smart

User Manual of Digital Video Recorder 113 Figure 6. 30 4-ch Synchronous Playback Interface  If more than one channel is optional, the synchronou

User Manual of Digital Video Recorder 114 6.3 Picture Playback Purpose: The captured pictures stored in the HDDs of the device can be searched and v

User Manual of Digital Video Recorder 115 Figure 6. 32 Result of Picture Playback 6. The toolbar in the bottom part of Playback interface can be u

User Manual of Digital Video Recorder 116 Chapter 7 Backup

User Manual of Digital Video Recorder 117 7.1 Backing up Record Files Before you start: Please insert the backup device(s) into the device. 7.1.1 Q

User Manual of Digital Video Recorder 118 Figure 7. 2 Quick Export using USB1-1 4. Select the backup device from the drop-down list and click the b

User Manual of Digital Video Recorder 11 7.2 Backing up Pictures ...

User Manual of Digital Video Recorder 119 When the backup device is the eSATA HDD, click Menu>Record>Advanced, select eSATA1 from the eSATA dro

User Manual of Digital Video Recorder 120 The size of the currently selected files is displayed in the lower-left corner of the window. Figure 7.

User Manual of Digital Video Recorder 121 7.1.3 Backing up by Event Search Purpose: The event triggered recordings can be backed up on USB devices (

User Manual of Digital Video Recorder 122 Click the button Details, and you can view the detailed information of selected events. Then, select the re

User Manual of Digital Video Recorder 123 5. The exported record files will be displayed in a list on the Export interface. You can click to view

User Manual of Digital Video Recorder 124 Figure 7. 15 Interface of Playback by Time 2. In the playback process, click the icon / in the playbac

User Manual of Digital Video Recorder 125 Figure 7. 17 Export Video Clips Using USB Flash Drive Stay in the Exporting interface until all record fil

User Manual of Digital Video Recorder 126 7.2 Backing up Pictures Task 1: Back up Captured Pictures when Playback Purpose: Back up the pictures capt

User Manual of Digital Video Recorder 127 4. Refer to the steps4~5 in Chapter 7.1.4 to export the pictures. Task 2: Back up All Types of Captured P

User Manual of Digital Video Recorder 128 the button Export All to select all the pictures and enter the Export interface. Here we take USB flash dr

User Manual of Digital Video Recorder 12 9.4.3 Checking Network Status ...

User Manual of Digital Video Recorder 129 7.3 Managing Backup Devices We use the interface of DS-9000HFI-RT series (unless otherwise stated) as exa

User Manual of Digital Video Recorder 130 For USB Writers and DVD-R/W: Click the button Erase, and you can erase the files from a re-writable CD/DVD.

User Manual of Digital Video Recorder 131 7.4 Hot Spare Backup This section is only applicable to the devices of HDVR series. Before you start: At

User Manual of Digital Video Recorder 132 Figure 7. 31 Hot Spare Mode Settings 7.4.2 Setting the Working Device Steps: 1. Enter the Hot Spare Set

User Manual of Digital Video Recorder 133 7.4.3 Hot Spare Management Steps: 1. Enter the Hot Spare Settings interface of the hot spare device again

User Manual of Digital Video Recorder 134 function. The record synchronization function can be enabled for up to 1 working device at a time. Figure

User Manual of Digital Video Recorder 135 Chapter 8 Alarm Settings

User Manual of Digital Video Recorder 136 8.1 Setting Motion Detection We use the interface of DS-9100HFI-ST series (unless otherwise stated) as ex

User Manual of Digital Video Recorder 137 Figure 8. 4 Set Trigger Camera of Motion Detection for HDVR Series Triggering IP Camera is supported by

User Manual of Digital Video Recorder 138 6. If you want to set motion detection for another channel, repeat the above steps or just click Copy in t

User Manual of Digital Video Recorder 13 13.1.1 Viewing Device Information ...

User Manual of Digital Video Recorder 139 8.2 Setting Sensor Alarm Purpose: You can set handling method of an external sensor alarm. Sensor alarm i

User Manual of Digital Video Recorder 140 Time periods cannot be repeated or overlapped. Figure 8. 10 Set Arming Schedule of Alarm Input 5. Select

User Manual of Digital Video Recorder 141 Figure 8. 12 Copy Settings of Alarm Input

User Manual of Digital Video Recorder 142 8.3 Setting VCA Alarm Before you start: Enable the VCA (Video Content Analysis) function and set the detec

User Manual of Digital Video Recorder 143 4. Set arming schedule of the channel. Select Arming Schedule tab and set arming schedule of the channel.

User Manual of Digital Video Recorder 144 8.4 Detecting Video Loss Purpose: Detect video loss of a channel and take alarm response action(s). Steps:

User Manual of Digital Video Recorder 145 5. If you want to set video loss handling method for another channel, repeat the above steps or just click

User Manual of Digital Video Recorder 146 8.5 Detecting Video Tampering Purpose: Trigger alarm and take alarm response action(s) when the lens is co

User Manual of Digital Video Recorder 147 4. Select Linkage Action tab to set alarm linkage actions of video tampering alarm. For details, see Chapt

User Manual of Digital Video Recorder 148 8.6 Handling Exceptions Purpose: Exception settings refer to the handling method of various exceptions, e.

User Manual of Digital Video Recorder 14 Chapter 1 Introduction

User Manual of Digital Video Recorder 149 3. Set the alarm linkage actions. For details, see Chapter 8.7. 4. Click Apply to save the settings. Fig

User Manual of Digital Video Recorder 150 8.7 Setting Alarm Linkage Actions Purpose: Alarm linkage actions will be activated when an alarm or except

User Manual of Digital Video Recorder 151 1. Enter Alarm Output interface. Menu> Configuration> Alarm> Alarm Output Select an alarm output

User Manual of Digital Video Recorder 152 Figure 8. 27 Copy Settings of Alarm Output

User Manual of Digital Video Recorder 153 8.8 Triggering or Clearing Alarm Output Manually Purpose: Sensor alarm can be triggered or cleared ma

User Manual of Digital Video Recorder 154 Chapter 9 Network Settings

User Manual of Digital Video Recorder 155 9.1 Configuring General Settings Purpose: Network settings must be properly configured before you operate

User Manual of Digital Video Recorder 156 In network settings interface: The FTP setting is supported by DVR series only. The Dual NIC (network inte

User Manual of Digital Video Recorder 157 Figure 9. 5 Load Balance Working Mode Net Fault-tolerance Mode: The two NIC cards use the same IP address

User Manual of Digital Video Recorder 158 9.2 Configuring Advanced Settings We use the interface of DS-9100HFI-ST series (unless otherwise stated)

User Manual of Digital Video Recorder 15 1.1 Front Panel The front panels of the devices are shown in Figure 1.1. DS-9100/9000HFI-ST & DS-9100/

User Manual of Digital Video Recorder 159 Prior registration with your ISP is required before configuring the system to use DDNS. Steps: 1. Enter th

User Manual of Digital Video Recorder 160 Figure 9. 12 Peanut Hull Settings Interface • NO-IP: Enter the account information in the correspondin

User Manual of Digital Video Recorder 161 Figure 9. 15 Register an Account 3) In the Device Management interface, click to register the device.

User Manual of Digital Video Recorder 162 Device Domain Name: It refers to the Device Domain Name on the device or the Device Name on the HiDDNS serv

User Manual of Digital Video Recorder 163 network, NTP software can be used to establish a NTP server used for time synchronization. 9.2.4 Configuri

User Manual of Digital Video Recorder 164 Directory: In the Directory field, you can select the Root directory, Parent directory and secondary direct

User Manual of Digital Video Recorder 165 9.2.6 Configuring NAT Settings Two ways are provided for port mapping to realize the remote access via the

User Manual of Digital Video Recorder 166 If you select Manual as the mapping type, you can edit the external port on your demand by clicking to ac

User Manual of Digital Video Recorder 167 The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value of the other ports

User Manual of Digital Video Recorder 168 Figure 9. 29 More Settings Interface 3. Enter Alarm Host IP and Alarm Host Port in the text fields. Th

User Manual of Digital Video Recorder 16 Table 1. 1 Description of Control Panel Buttons (1) No. Name Function Description 1 ALARM Alarm indicator tu

User Manual of Digital Video Recorder 169 9.2.9 Configuring RTSP Settings Purpose: The RTSP (Real Time Streaming Protocol) is a network control prot

User Manual of Digital Video Recorder 170 The Server Port should be set to the range of 2000-65535 and it is used for remote client software access.

User Manual of Digital Video Recorder 171 2) Enter the country, host name/IP, validity and other information. 3) Click OK to save the settings.

User Manual of Digital Video Recorder 172 If you enable the high-speed download function, the local menu operation will be affected. It is recommende

User Manual of Digital Video Recorder 173 Figure 9. 40 Email Settings Interface 5. Configure the following Email settings: Enable Server Authentic

User Manual of Digital Video Recorder 174 Figure 9. 42 Email Testing Attention 9.2.14 Virtual Host Settings Purpose: You can directly get acces

User Manual of Digital Video Recorder 175 9.2.15 Telnet Settings Purpose: Telnet function provides an easy way to get access to the DVR/HDVR. You can

User Manual of Digital Video Recorder 176 9.3 Checking Network Traffic Purpose: You can check the network traffic to obtain real-time infor

User Manual of Digital Video Recorder 177 9.4 Network Detection Purpose: You can obtain network connecting status of device through the network dete

User Manual of Digital Video Recorder 178 9.4.2 Exporting Network Packet Purpose: By connecting the device to network, the captured network dat

User Manual of Digital Video Recorder 17 On checkbox fields, pressing the button will tick the checkbox. In PTZ Control mode, the button adjusts the

User Manual of Digital Video Recorder 179 9.4.3 Checking Network Status Purpose: You can also check the network status and quick set the network p

User Manual of Digital Video Recorder 180 Figure 9. 55 Network Parameters Configuration 9.4.4 Checking Network Statistics Purpose: You can che

User Manual of Digital Video Recorder 181 Chapter 10 RAID Configuration

User Manual of Digital Video Recorder 182 This chapter is available for DS-9100/9000HFI-RT series only. For the configuration for alarm linkage acti

User Manual of Digital Video Recorder 183 10.1.1 One-touch Configuration Purpose: Through one-touch configuration, you can quickly create the disk ar

User Manual of Digital Video Recorder 184 5. You can click Array tab to view the information of the successfully created array. By default, one-tou

User Manual of Digital Video Recorder 185 Figure 10. 6 Physical Disk Settings Interface 2. Click Create to enter the Create Array interface. Figu

User Manual of Digital Video Recorder 186 If the number of HDDs you select is not compatible with the requirement of the RAID level, the error messag

User Manual of Digital Video Recorder 187 the RAID, and cannot detect the bad sector. Foreground (Recommended): By using foreground initialization, t

User Manual of Digital Video Recorder 188 Figure 10. 14 Hot Spare Disk

User Manual of Digital Video Recorder 18 If GUARD indicator is blue (default), all the alarm event and exception settings are valid. Otherwise, alarm

User Manual of Digital Video Recorder 189 10.2 Rebuilding Array Purpose: The working status of array includes Functional, Disk Loss and Offline. By v

User Manual of Digital Video Recorder 190 10.2.2 Manually Rebuilding Array Purpose: If there is no hot spare disk available, you can rebuild the arra

User Manual of Digital Video Recorder 191 10.3 Repairing Virtual Disk Purpose: When the disk cannot be displayed on the HDD Information interface whi

User Manual of Digital Video Recorder 192 10.4 Deleting Array / Virtual Disk Before deleting the array, the virtual disk(s) under this array must be

User Manual of Digital Video Recorder 193 Figure 10. 25 Array Settings Interface 2. Select an array and click to delete the array. Figure 10.

User Manual of Digital Video Recorder 194 10.5 Upgrading Firmware Purpose: You can view the information of the firmware and upgrade the firmware by l

User Manual of Digital Video Recorder 195 Figure 10. 28 Upgrade the Firmware

User Manual of Digital Video Recorder 196 Chapter 11 HDD Management

User Manual of Digital Video Recorder 197 In this chapter, we use the interface of DS-9100HFI-ST series (unless otherwise stated) as example to desc

User Manual of Digital Video Recorder 198 Figure 11. 3 Confirm Initialization 4. Select OK to start initialization. Figure 11. 4 Start Initiali

User Manual of Digital Video Recorder 1 Hikvision® Network Digital Video Recorder User Manual This manual, as well as the software described

User Manual of Digital Video Recorder 19 1.2 IR Remote Control Operations The device may also be controlled with the included IR remote control, sho

User Manual of Digital Video Recorder 199 11.2 Managing Network HDD Purpose: You can add the allocated NAS or disk of IP SAN to device, and use it as

User Manual of Digital Video Recorder 200 2) Click Search to search the available NAS disks. 3) Select the NAS disk from the list shown below. Or

User Manual of Digital Video Recorder 201 If the added NetHDD is uninitialized, please select it and click Init for initialization. Figure 11. 11 In

User Manual of Digital Video Recorder 202 11.3 Managing eSATA Purpose: When there is an external eSATA device connected to device, you c

User Manual of Digital Video Recorder 203 11.4 Managing HDD Group 11.4.1 Setting HDD Groups Purpose: Multiple HDDs can be managed in groups. Video fr

User Manual of Digital Video Recorder 204 6. Select a HDD from the list and click to enter the Local HDD Settings interface. Figure 11. 17 Local

User Manual of Digital Video Recorder 205 Figure 11. 19 Set HDD Property 3. Set the HDD property to R/W, Read-only or Redundancy. 4. Click OK to

User Manual of Digital Video Recorder 206 11.5 Configuring Quota Mode Purpose Each camera can be configured with allocated quota for the storage of r

User Manual of Digital Video Recorder 207 Figure 11. 23 Copy Settings to Other Camera(s) for HDVR Series IP Camera is supported by HDVR series onl

User Manual of Digital Video Recorder 208 11.6 Configuring Frame Extracting Mode Purpose: If you want to extend the record time of the HDD, you can s

User Manual of Digital Video Recorder 20 5 A Button Adjust focus in the PTZ Control menu. It is also used to switch input methods (upper and lowercas

User Manual of Digital Video Recorder 209  The estimation of the record time is only for reference.  If you change the storage capacity of the d

User Manual of Digital Video Recorder 210 11.7 Configuring Disk Clone Before you start: Connect a HDD to the device via the eSATA interface. Purpose:

User Manual of Digital Video Recorder 211 The capacity of destination disk must be the same as that of the clone source disk. 4. Check the checkbo

User Manual of Digital Video Recorder 212 11.8 Checking HDD Status Purpose: You may check the status of the installed HDDs on device so as to take im

User Manual of Digital Video Recorder 213 11.9 Checking S.M.A.R.T. Information Purpose: The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Techn

User Manual of Digital Video Recorder 214 11.10 Detecting Bad Sector Purpose: You can detect the bad sector of the HDD to check the status of the HD

User Manual of Digital Video Recorder 215 11.11 Configuring HDD Error Alarms Purpose: You can configure the HDD error alarms when the HDD status is

User Manual of Digital Video Recorder 216 Chapter 12 Camera Settings

User Manual of Digital Video Recorder 217 12.1 Configuring OSD Settings Purpose: You can configure the OSD (On-screen Display) settings for the camer

User Manual of Digital Video Recorder 218 Copying the OSD settings to network cameras is not available. 2) Select the camera (s) to be configured

User Manual of Digital Video Recorder 21 Make sure you have installed batteries properly in the remote control. And you have to aim the remote contr

User Manual of Digital Video Recorder 219 12.2 Configuring Privacy Mask Purpose: Privacy mask enables you to cover certain areas on the live video to

User Manual of Digital Video Recorder 220 7. Click Apply to save the settings. 12.3 Configuring Video Parameters Steps: 1. Enter the Image Settings

User Manual of Digital Video Recorder 221 Figure 12. 7 Image Settings Interface for IP Camera  The defog mode is only available for analog camer

User Manual of Digital Video Recorder 222 Chapter 13 Device Management and Maintenance

User Manual of Digital Video Recorder 223 13.1 Viewing System Information 13.1.1 Viewing Device Information Steps: 1. Enter the System Information i

User Manual of Digital Video Recorder 224 Figure 13. 3 Camera Information Interface for HDVR Series 13.1.3 Viewing Record Information Steps: 1. En

User Manual of Digital Video Recorder 225 Figure 13. 5 Record Information Interface for HDVR Series 13.1.4 Viewing Alarm Information This function

User Manual of Digital Video Recorder 226 Menu > Maintenance > System Info 2. Click the Network tab to enter the Network Information interfa

User Manual of Digital Video Recorder 227 13.2 Searching & Exporting Log Files Purpose: The operation, alarm, exception, information and running

User Manual of Digital Video Recorder 228 Figure 13. 10 Log Search Results 5. You can click of each log or double-click the log to view its d

User Manual of Digital Video Recorder 22 1.3 USB Mouse Operation A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this d

User Manual of Digital Video Recorder 229 Figure 13. 13 Export Log Files 8. Select the backup device from the drop-down list of Device Name. 9. C

User Manual of Digital Video Recorder 230 13.3 Importing/Exporting Configuration Files Purpose: The configuration files of the device can be exported

User Manual of Digital Video Recorder 231 13.4 Upgrading System Purpose: The firmware on your device can be upgraded by local backup device or remote

User Manual of Digital Video Recorder 232 13.5 Restoring Default Settings Steps: 1. Enter the Default interface. Menu > Maintenance > Default

User Manual of Digital Video Recorder 233 Chapter 14 Others

User Manual of Digital Video Recorder 234 14.1 Configuring RS-232 Serial Port Purpose: The RS-232 port can be used in two ways: Parameters Configurat

User Manual of Digital Video Recorder 235 14.2 Configuring General Settings Purpose: You can configure the BNC output standard, VGA output resolution

User Manual of Digital Video Recorder 236 • System Time: Select the system time. • Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels ar

User Manual of Digital Video Recorder 237 14.3 Configuring DST Settings Steps: 1. Enter the General Settings interface. Menu >Configuration>

User Manual of Digital Video Recorder 238 14.4 Configuring More Settings Steps: 1. Enter the General Settings interface. Menu > Configuration >

User Manual of Digital Video Recorder 23 1.4 Input Method Description Figure 1. 4 Soft Keyboard (1) Figure 1. 5 Soft Keyboard (2) Description of

User Manual of Digital Video Recorder 239 14.5 Managing User Accounts Purpose: There is a default account in the device: Administrator. The Administr

User Manual of Digital Video Recorder 240 • Guest: The Guest user has permission of Local Log Search in Local Configuration, Remote Log Search in Rem

User Manual of Digital Video Recorder 241 Local Camera Management is supported by HDVR series. 6. Set the operating permission of Local Configurati

User Manual of Digital Video Recorder 242 1. Enter the User Management interface. Menu > Configuration > User 2. Select the user to be delete

User Manual of Digital Video Recorder 243 Figure 14. 13 Edit User Interface 4. Edit the user information, including user name, password, level and

User Manual of Digital Video Recorder 244 Figure 14. 15 Change Password 3. Enter the old password, check checkbox, enter new password and confi

User Manual of Digital Video Recorder 245 14.6 Logging out / Shutting down / Rebooting Device Steps: 1. Enter the Shutdown interface. Menu > Shut

User Manual of Digital Video Recorder 246 Chapter 15 Appendix

User Manual of Digital Video Recorder 247 Glossary • Dual Stream: Dual stream is a technology used to record high resolution video locally while tra

User Manual of Digital Video Recorder 248 Troubleshooting No image displayed on the monitor after the device is starting up normally. Possible Reaso

User Manual of Digital Video Recorder 24 1.5 Rear Panel DS-9100/9000HFI-ST DS-9200/9100/9000HWI-ST & DS-9100/9000HFI-RT DS-9100/9000HFI-XT D

User Manual of Digital Video Recorder 249 4. Check if the fault is solved by the step 1 to step 3. 1) If it is solved, finish the process. 2) If n

User Manual of Digital Video Recorder 250 1) Verify the power indicator is normal. 2) When the IPC is offline, please try the ping command on PC to

User Manual of Digital Video Recorder 251 1) When image is stuck, connect the RS-232 ports on PC and the rear panel of device with the RS-232 cable.

User Manual of Digital Video Recorder 252 Simultaneously press the Ctrl and C to exit the ping command. 2. Verify the frame rate is real-time frame

User Manual of Digital Video Recorder 253 Summary of Changes Version 3.1.0 Added 1. Support smart IP camera connection, VCA alarm and VCA triggered

User Manual of Digital Video Recorder 254 List of Compatible IP Cameras List of Hikvision IP Cameras For the list, our company holds right to interp

User Manual of Digital Video Recorder 255 Type Model Version Max. Resolution Sub-stream Audio DS-2CD8464F-EI V5.1.0 build 131202 1280×960 √ √ DS-2CD8

User Manual of Digital Video Recorder 256 Type Model Version Max. Resolution Sub-stream Audio DS-2CD4212F-I(2.8-12mm) V5.1.0 build 131202 1280×960 √

User Manual of Digital Video Recorder 257 Type Model Version Max. Resolution Sub-stream Audio DS-2CD793PF(WD)-E(I) V5.1.0 build 131202 704×576 √ √ DS

User Manual of Digital Video Recorder 258 Type Model Version Max. Resolution Sub-stream Audio DS-2DF5286-A/D/A3/D3/AF/A3F DS-2DE5172-A/A3 DS-2DE5174-

User Manual of Digital Video Recorder 25 DS-8100/8000HWI-ST Figure 1. 6 Rear Panel (1) Table 1. 6 Description of Rear Panel (1) No. Item Descriptio

User Manual of Digital Video Recorder 259 Type Model Version Max. Resolution Sub-stream Audio DS-2ZCN3006 DS-2ZMN2006 DS-2ZMN3006 V5.0.2 build130926

User Manual of Digital Video Recorder 260 List of Third-party IP Cameras ONVIF compatibility refers to the camera can be supported both when it uses

User Manual of Digital Video Recorder 261 IP Camera Manufacturer or Protocol Model Version Max. Resolution Sub-stream Audio WFB-100Ap V3.1.0.9 1280×8

User Manual of Digital Video Recorder 262 IP Camera Manufacturer or Protocol Model Version Max. Resolution Sub-stream Audio F3206 MG.1.6.02c045 1920×

User Manual of Digital Video Recorder 263

User Manual of Digital Video Recorder 26 ALARM IN Connector for alarm input. ALARM OUT Connector for alarm output. 16 GND Ground (needs to be connect

User Manual of Digital Video Recorder 27 1.6 Starting Up and Shutting Down the Device Purpose: Proper startup and shutdown procedures are crucial to

User Manual of Digital Video Recorder 28 • Take 2: By operating the front panel (not available for 7200 series) 1. Press and hold the POWER button o

User Manual of Digital Video Recorder 2 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact

User Manual of Digital Video Recorder 29 Chapter 2 Getting Started

User Manual of Digital Video Recorder 30 2.1 Using the Wizard for Basic Configuration By default, the Setup Wizard starts once the device has loaded

User Manual of Digital Video Recorder 31 Figure 2. 3 Date and Time Settings 6. After the time settings, click Next which takes you to the Network

User Manual of Digital Video Recorder 32 window (supported by DS-9100/9000HFI-RT series only). Figure 2. 5 Array Management 8. After configuring a

User Manual of Digital Video Recorder 33 Click the icon , and you can enable the continuous recording or motion Detection recording for all channels

User Manual of Digital Video Recorder 34 2.2 Adding and Connecting the IP Cameras This Chapter is available for HDVR series only. 2.2.1 Adding t

User Manual of Digital Video Recorder 35 004&8004HFI-ST&DS-9004HFI-RT&9004HWI-ST series at most when all the analog cameras are

User Manual of Digital Video Recorder 36 Or click the button Add All to add all the online cameras automatically. The user name and p

User Manual of Digital Video Recorder 37 Figure 2. 14 Import IP Camera Configuration File 2) Select the backup device from the drop-down list and

User Manual of Digital Video Recorder 38 Figure 2. 16 Export IP Camera Configuration File 2) Select the backup device from the drop-down list and

User Manual of Digital Video Recorder 3 Regulatory information FCC information FCC compliance: This equipment has been tested and found to comply wi

User Manual of Digital Video Recorder 39 Figure 2. 18 Edit IP Camera 2. Edit the camera information, such as the IP address, protocol, port, etc.

User Manual of Digital Video Recorder 40 2. There are 16 custom protocols provided in the system. Select a custom protocol from the drop-down list,

User Manual of Digital Video Recorder 41 Chapter 3 Live View

User Manual of Digital Video Recorder 42 3.1 Introduction of Live View Live view shows you the video image getting from each camera in real time. Th

User Manual of Digital Video Recorder 43 3.2 Operations in Live View Mode In live view mode, there are many functions provided. Some of the function

User Manual of Digital Video Recorder 44 for channel 2. Show multi-screen Press the PREV/FOCUS- button. Manually switch screens Next screen: right d

User Manual of Digital Video Recorder 45 Figure 3. 1 Right-click Menu-DVR Series Figure 3. 2 Right-click Menu-HDVR Series 3.2.3 Using an Auxiliar

User Manual of Digital Video Recorder 46 3.2.4 Quick Setting Toolbar in Live View Mode Click on the live view window, a quick setting toolbar will b

User Manual of Digital Video Recorder 47 • Dim Light: the image is smoother than the other two modes. • Outdoor: the image is relatively clearer an

User Manual of Digital Video Recorder 48 Figure 3. 7 Image Settings- Customize for Network Camera Live View Strategy icon can be selected to enter t

User Manual of Digital Video Recorder 4 Preventive and Cautionary Tips Before connecting and operating your device, please be advised of the followin

User Manual of Digital Video Recorder 49 Figure 3. 9 Information

User Manual of Digital Video Recorder 50 3.3 Adjusting Live View Settings Purpose: Live View settings can be customized to meet different needs. You

User Manual of Digital Video Recorder 51 Figure 3. 11 Live View- Camera Order To set the camera order: 1) Click the View tab. 2) Select a Video O

User Manual of Digital Video Recorder 52 3.4 Channel-zero Encoding Purpose: Sometimes you need to get a remote view of many channels in real time fr

User Manual of Digital Video Recorder 53 3.5 Manual Video Quality Diagnostics Purpose: The video quality of the analog channels can be diagnosed man

User Manual of Digital Video Recorder 54 3.6 User Logout Purpose: After logging out, the monitor turns to the live view mode and if you want to do s

User Manual of Digital Video Recorder 55 Chapter 4 PTZ Control

User Manual of Digital Video Recorder 56 4.1 Configuring PTZ Settings Purpose: Follow the procedure to set the parameters for PTZ. The configuring o

User Manual of Digital Video Recorder 57 4.2 Setting PTZ Presets, Patrols & Patterns Before you start: Make sure that the presets, patrols and p

User Manual of Digital Video Recorder 58 4.2.2 Calling Presets Purpose: The view angle of the PTZ camera will be moved to the predefined position wh

User Manual of Digital Video Recorder 5 Product Key Features General  Connectable to the network cameras, network dome and encoders (this

User Manual of Digital Video Recorder 59 2. Click the Camera tab on the panel, and select the channel for control on the camera list. 3. Click the

User Manual of Digital Video Recorder 60 You can also click to delete the corresponding key point and click to delete all the key points. Figu

User Manual of Digital Video Recorder 61 Figure 4. 10 PTZ Panel- Patrol 4.2.5 Customizing Patterns Purpose: A pattern is a memorized, repeating se

User Manual of Digital Video Recorder 62 4.2.6 Calling Patterns Purpose: The PTZ camera will move according to the predefined pattern path when you

User Manual of Digital Video Recorder 63 4.3 PTZ Control Panel To enter the PTZ control Panel, there are 2 ways supported: Option1: In the PTZ set

User Manual of Digital Video Recorder 64 Stop the patrol or pattern movement Minimize windows Exit

User Manual of Digital Video Recorder 65 Chapter 5 Record and Capture Settings

User Manual of Digital Video Recorder 66 Sensor alarm is not supported by DS-7200HWI-SV series. The interfaces of the device are subject to the actu

User Manual of Digital Video Recorder 67 2. Encoding Parameters for Recording 1) Click the Record tab to configure the record parameters, such as s

User Manual of Digital Video Recorder 68 3. Encoding Parameters for Sub-stream 1) Click the Substream tab to configure the parameters of sub-stream

User Manual of Digital Video Recorder 6 storage capacity.  8 network disks (8 NAS disks, or 7 NAS disks+1 IP SAN disk) can be connected.  Support

User Manual of Digital Video Recorder 69  The two-way audio record can only be bound to the analog cameras.  The bound two-way audio record will

User Manual of Digital Video Recorder 70 5.2 Configuring Record/Capture Schedule Purpose: Set the record schedule, and then the camera automatical

User Manual of Digital Video Recorder 71 as well. For detailed information, refer to Chapter 8.1 and Chapter 8.2. Figure 5. 11 Edit Schedule 5) To

User Manual of Digital Video Recorder 72 6) Click OK to save setting and back to upper level menu. Task 2: Draw the Schedule Steps: 1) Click to sel

User Manual of Digital Video Recorder 73 Figure 5. 15 Draw the Schedule (2) You can repeat the above steps to set schedule for other channels. If t

User Manual of Digital Video Recorder 74 5.3 Configuring Motion Detection Recording and Capture Purpose: Follow the steps to set the motion detect

User Manual of Digital Video Recorder 75 IP Camera is supported by HDVR series only. 5) Select the channels which you want the motion detection eve

User Manual of Digital Video Recorder 76 5.4 Configuring Alarm Triggered Recording and Capture Purpose: Follow the procedure to configure alarm trig

User Manual of Digital Video Recorder 77 Figure 5. 24 Alarm Settings for DVR Series Figure 5. 25 Alarm Settings for HDVR Series IP Camera is supp

User Manual of Digital Video Recorder 78 Figure 5. 27 Record Schedule

User Manual of Digital Video Recorder 7 mismatch, illegal login, network disconnected, IP confliction, abnormal record/capture, HDD error, and HDD fu

User Manual of Digital Video Recorder 79 5.5 Configuring Manual Recording and Continuous Capture Purpose: Follow the steps to set parameters for t

User Manual of Digital Video Recorder 80 Figure 5. 30 Continuous Recording Figure 5. 31 Motion Detection Recording 2) Click Yes to enable all

User Manual of Digital Video Recorder 81 5.6 Configuring Holiday Recording and Capture Purpose: You may want to have different plan for recording

User Manual of Digital Video Recorder 82 There are three different modes for the date format to configure holiday schedule, including Date, Week and

User Manual of Digital Video Recorder 83 5.7 Configuring Redundant Recording and Capture Purpose: The record files and captured pictures are stored

User Manual of Digital Video Recorder 84 1) Select Record. Figure 5. 40 Record Parameters 2) Select Camera you want to configure. 3) Check ch

User Manual of Digital Video Recorder 85 5.8 Configuring HDD Group for Recording and Capture Purpose: You can group the HDDs and save the record fil

User Manual of Digital Video Recorder 86 IP Camera is supported by HDVR series only. 2) Choose Group number in the drop-down list of Record on HDD

User Manual of Digital Video Recorder 87 5.9 Files Protection Purpose: You can lock the recorded files or set the HDD property to Read-only to prote

User Manual of Digital Video Recorder 88 Figure 5. 45 Locked File Management 4. You can click the icon on the Locked File Management interface

User Manual of Digital Video Recorder 8  SDK for Windows and Linux system.  Source code of application software for demo.  Development support

User Manual of Digital Video Recorder 89 Figure 5. 47 Export- Search Result 5. Protect the record files. 1) Select the record file to be protecte

User Manual of Digital Video Recorder 90 Figure 5. 50 HDD General- Editing 3. Set the HDD to Read-only. 4. Click OK to save settings and back to

User Manual of Digital Video Recorder 91 Chapter 6 Playback

User Manual of Digital Video Recorder 92 6.1 Playing Back Record Files  We use the interface of DS-9000HFI-ST series (unless otherwise stated) as

User Manual of Digital Video Recorder 93 Figure 6. 2 Right-click Menu-DVR Series Figure 6. 3 Right-click Menu-HDVR Series Front Panel: Press PLAY

User Manual of Digital Video Recorder 94 Figure 6. 4 Playback Interface  The indicates the start time and end time of the record files. 

User Manual of Digital Video Recorder 95  If there are normal recordings (manual or schedule) for that camera in that day, on the calendar, the ico

User Manual of Digital Video Recorder 96  represents normal recording (manual or schedule); represents event recording (motion, alarm

User Manual of Digital Video Recorder 97 Figure 6. 8 Event Playback Interface-Motion The VCA event search is only available to the HDVR series. 4.

User Manual of Digital Video Recorder 98 5. Click button to play back the record files. You can click Back to return to the search interface. Pr